|
Wingspan |
1016mm retracted 1550mm extended / 40in retracted 61in extended |
|
Length |
1498mm / 59in |
|
Weight |
4160g without battery / 147oz |
| CG (Center of Gravity) |
393mm measured back from the intake |
|
Power System |
2x 3530-1750kV Brushless Outrunner Motor |
|
Electronic Speed Control |
2x 80A ESCs, 8A UBEC, EC5 Connector |
|
Propeller / EDF |
2x 80mm Metal EDF with 12 Blade Fan |
|
Servos |
2x 9g servos (steering, nose gear door)
5x 17g metal gear servos (starboard elevator, starboard aileron, port aileron, port flap, starboard rudder)
3x 17g metal gear reverse servos (starboard flap, port elevator, port rudder) |
| Landing Gear |
Electronic retractable main gear and steerable nose gear with all metal shock absorbing struts |
|
Required Battery |
2x 6S 22.2V 4000mAh LiPo (required) |
|
Required Radio |
7+ Channel full range 2.4Ghz (using pre-installed mixing board) |
| Ailerons |
Yes |
|
Elevator |
Yes |
| Rudder |
Yes |
|
Flaps |
Yes |
|
Lights |
Yes (landing light, 9x LEDs) |
|
Hinge Type |
Nylon gapless hinges |
| Material |
EPO Foam |
| Skill Level |
Advanced/Expert |
| Build Time |
2 Hours |
| Recommended Environment |
Minimum 300 foot runway, recommended pavement, mat, or short turf |
