|
Brief of introduction:
The 3A UBEC is an advanced switching DC-DC regulator which will be supplied a constant 3A or more with short bursts of up to 5A. The 3A UBEC supplied with 2~8S lipo battery pack and output as consistent safe power for your receiver, gyro and servos. It is very suitable for big electric RC models such as fixed-wing aircrafts and helicopters which use more than 4S lithium battery.
BTW this 3A UBEC also added a set of independent electronic remote control switch function, and can provide independent continuous 2A/ 5V or 6V output. This function can be connected receiver AUX channel or other desire channel – be reminded to set the related channel travel throw at +- 100%. It can be operated the function such as smoking system/ drop bomb/ flashing light & sound effects system, canopy operation., etc.
3A UBEC는 발전된 사양의 스위칭 DC-DC 레귤레이터로서 일정한 3A 또는 순간적 으로 5A 까지의 출력을 공급합니다.
2~8셀 리포 배터리를 사용하여 일정하며 안정적인 전원을 수신기, 자이로 , 서보등에 공급하며, 큰 모델 비행기나 헬리콥터 등 4 셀 이상의 배터리를 사용하는 제품에 적합합니다.
또한 독립적인 무선 작동 스위치 기능도 내장이 되어있어 5또는 6V 2A의 일정한 전원 공급을 무선으로 제어 가능합니다.
이 기능은 수신기의 빈 채널에 꼽으시고 비행기의 스모킹 시스템이나 모형 폭탄 투하, 라이트, 캐노피 동작 또는 사운드 이팩트 시스템 (엔진이나 기관총 소리) 등의 전원을 송신기에서 조정 가능하게 해 줍니다.
(이 기능을 사용하실때 그 해당 채널의 travel throw를 +- 100%로 지정해 주십시오)
Specification:
1. Input：7.4V~30V (2~8S lipo)
2. Output Voltage：5V@3A or 6V@3A (Selectable by using a jumper connector)
3. Output current：Continuous 3A burst 5A
4. Quiescent current：20mA
5. Electronic switch output：2A, 5V or 6V
6. Size：40mmx23mmx11mm (LxWxH)
7. Weight：26g
Features:
1) Much higher efficiency (up to 92%) than the linear mode BEC.
2) With ultra-wide input voltage from 7.4V~30V.
3) Safe power on with the Battery Polarity Reversal Protection function. If the input polarity is not correct, the UBEC will not be damaged.
4) Out-put short-circuit protection function.
5) With a very thin copper metal shielding cover, reduceelectromagnetic interference, and a good heat dissipation effect.
7) When the electronic switch function on- blue LED lights up, and provide the continuous 2A 5V or 6V output.
Brief of introduction:
The 5A UBEC is an advanced switching DC-DC regulator which will be supplied a constant 5A or more with short bursts of up to 7.5A. The 5A UBEC supplied with 2~11S lipo battery pack and output as consistent safe power for your receiver, gyro and servos. It is very suitable for big electric RC models such as fixed-wing aircrafts and helicopters which use more than 4S lithium battery.
BTW this 5A UBEC also added a set of independent electronic remote control switch function, and can provide independent continuous 2A/ 5V or 6V output. This function can be connected receiver AUX channel or other desire channel – be reminded to set the related channel travel throw at +- 100%. It can be operated the function such as smoking system/ drop bomb/ flashing light & sound effects system, canopy operation., etc.
Specification:
1. Input：7.4V~42V (2~11S lipo) High Voltage
2. Output Voltage：5V@5A or 6V@5A (Selectable by using a jumper connector)
3. Output current：Continuous 5A burst 7.5A
4. Quiescent current：20mA
5. Electronic switch output：2A, 5V or 6V
6. Size：50mmx28mmx12mm (LxWxH)
7. Weight：30g
Features:
1) Much higher efficiency (up to 92%) than the linear mode BEC.
2) With ultra-wide input voltage from 7.4V~42V.
3) Safe power on with the Battery Polarity Reversal Protection function. If the input polarity is not correct, the UBEC will not be damaged.
4) Out-put short-circuit protection function.
5) With a very thin copper metal shielding cover, reduceelectromagnetic interference, and a good heat dissipation effect.
6) Power output (ferrite ring)to reduce electromagnetic interference.
7) When the electronic switch function on- blue LED lights up, and provide the continuous 2A 5V or 6V output.
|
